Test 1
This test program will test your machine for correct position, accuracy and repeatability. The program also cancels all tool offsets, so it doesn't matter what size cutter is in your machine, it will cut on the centre line or mid point.
The file below will cut a circle 56.569 dia and a square 40x40mm
0.25mm deep
Download the file and give it try.
Click HERE to download Circle Inside Square test 1
Test 2
Test 2 is the same as test 1 except the cutter will cut 3mm deep into the material in steps, or increments of 0.25mm.
Click HERE to download Circle Inside Square Test 2
